Mustafa Sultan Science & Industry Co. L.L.C.
Field Instruments

HACH LANGE is THE single-source supplier for complete water analysis - with individual, made-to-measure, economic, high quality, total solutions:
  • Parameters for wastewater, drinking water, process water
  • On-site and laboratory analysis, process analysis, samplers
  • Municipal and industrial applications, research
HACH LANGE brings a new dimension to water analysis, based on a long tradition of excellence. The combination of Hach and Dr. Lange can draw on more than 120 years of experience of development, production and on-site applications. You, too, can benefit from our comprehensive range of products and services.

Alkalinity - Hardness
Low Range/ High Range Hardness
Analyzer, Range 50 to 10,000 ug/L

Alkalinity / Fluoride - Hardness
Titration, Ion Selective electrode or Colorimetric

Chlorine free / total

Reagent less, electrochemical, Three-electrode amperometric system

Chlorine free / total Photometric

Photometric Analyzer for free or
Total residual Chlorine determination

SC200 Controller
  • One controller for the broadest range of sensors (30 Analog and Digital sensors, 15 different parameters)
  • Operate two sensors with only one controller

SC1000 Multicontroller & Network
  • 1 Displaymodule
  • x Probemodules
  • 24 Sensors

Drinking Water Panel

Lange LDO™ Sensor
  • Luminescence Dissolved Oxygen
    • an optical and unique way (patent pending) of measuring Dissolved Oxygen
    • eliminates nearly all disadvantages of traditional electro chemical DO measurement

  • No calibration required
  • Stable measurement results
  • Independent from flow rate
  • Reduced cleaning frequency
POLYMETRON 9120 & 9125

Dual conductivity monitoring for high purity water

Industrial Municipal Products

Badger Meter's Industrial and Municipal products are used to measure liquid flow in a variety of industrial applications and municipal water/waste water treatment applications. Badger manufactures and markets a complete range of liquid flow meters including: positive displacement meters, impeller meters, turbine meters, oscillating piston meters, oval gear meters and electromagnetic meters. Badger's products can be found in a variety of applications including: petroleum, food and beverage, pharmaceutical, petrochemical, process water, water/waste water treatment, textile and the power industry. Badger also supplies various batch controllers and accessories to compliment the flow meter line including mechanical and electronic registers and transmitters.

M-Series® Mag Meters

M2000 Mag Meter
For general purpose detection and field verification testing

M3000 Mag Meter
For hazardous Class 1, Division 2 environments
M4000 Mag Meter
For hazardous Class 1, Division 1 environments
M5000 Mag Meter
For general purpose, battery operated detection and field verification testing

M2000 Mag Meter
For general purpose detection and field verification testing

The M2000 mag meter combines a general purpose detector with an amplifier representing the next generation of electromagnetic flow meter signal processing. This recent addition to the M-Series family features a user-friendly, advanced design and is built for field verification testing with the use of a simple, handheld device.
  • Rating: general purpose detection
  • Accuracy: ±0.25 percent
  • Sizes: ¼ inch to 54 inch (DN 6 to 1400)
  • Power supply: 85-265 VAC
  • AMR- and SCADA-ready outputs
Typical applications: Water and wastewater, well water and reclaimed water, bi-directional flow applications, chemical, pharmaceutical, and food and beverage applications.

M5000 Mag Meter
For general purpose, battery operated detection and field verification testing

With Wire Less GPRS/ GSM Data Recording

For general purpose detection in a standalone package, the battery operated M5000 mag meter is the ideal solution for remote applications. This new addition to the M-Series family features the same user-friendly design you expect from Badger Meter, conveniently powered by a battery designed for up to ten years of performance. The M5000 mag meter is built for field verification testing with the use of a simple, handheld device.

Recordall® Turbo Series Meters
Turbine Flow
The Recordall Turbo Series Meter is ideally suited for any water application, performing with great accuracy over a wide flow range. It also has very low pressure loss, increasing system efficiency. Sizes available are 1-1/2" to 20" (DN 40 to DN 500).

Turbo Meter Applications: Industrial water, water treatment and conditioning

Multi-turn actuators SA/R, SVC/R, combinations SA ... GST/GK, SVM/R

Electric multi-turn actuators by AUMA are used e.g. for the automation of gate valves or globe valves. They are the most versatile products within the AUMA family.

Whether for open-close duty (SA) or for modulating duty (SAR), or for use in potentially explosive areas (SA ... ExC), a large number of versions is available

Part-turn actuators

Part-turn actuators SG/R, SGC/R, combinations SA ... Marine actuators SGM/R

Electric part-turn actuators by AUMA are used where an automatic, electrically operated movement at a swing angle of less than 360 ° has to be implemented as it is the case for valves like butterfly and ball valves.

The well-proven SG .1 type range and its extension to the lower torque ranges by SG .3 type range, its modulating actuator version SGR, as well as the SGC/R type range with integral controls provide the customers with a multitude of possibilities to integrate actuators into the process control system.

The adaptation to the requirements of nearly every valve automation task is possible.


Pressure Transmitter for Pressure, Level and Flow Applications

Gage Pressure Transmitters

Temperature Transmitter

Measurement technology for highest reliability in every application

VEGA develops and manufactures sensors for the measurement of level, point level and pressure as well as equipment and software for integration into process control systems. VEGA's measurement technology sets new standards in reliability, accuracy and economy for all media and process conditions.

Ultrasonic sensor for continuous level measurement

KSB is one of the world's leading suppliers of pumps and valves and related systems

Contact Email: