Mustafa Sultan Science & Industry Co. L.L.C.
Process Test Equipments
Process and Calibration Equipments-Loop Calibrators and Process Multimeters-FLUKE

Loop Calibrators and Process Multimeters
  • Fluke 787 Process Meter
  • Fluke 715 Volt/mA Calibrator
  • Fluke 705 Loop Calibrator
  • Fluke 707 Loop Calibrator
  • Fluke 789 Process Meter&8482;
  • Fluke 707Ex Intrinsically safe loop calibrator

Process and Calibration Equipments-Multifunction and Hart Calibrators-FLUKE

Multifunction and Hart Calibrators
  • Fluke 725 Multifunction Process Calibator
  • Fluke 741B Documenting Process Calibrator
  • Fluke 743B Documenting Process Calibrator
  • Fluke 744 Documenting Process Calibrator
  • Fluke 725Ex Intrinsically Safe Multi-function Process Calibrator
  • Fluke 726 Precision Multifunction Process Calibrator
Process and Calibration Equipments-Pressure Calibrators-FLUKE

Pressure Calibrators
  • Fluke 717 Pressure Calibrator
  • Fluke 718 100G Pressure Calbrator
  • Fluke 718Ex Intrinsically Safe Pressure Calibrator
Process and Calibration Equipments-Temperature Calibrators-FLUKE

Temperature Calibrators
  • Fluke 712 RTD
  • Calibrator Fluke 714
  • Thermocouple Calibrator
  • Fluke 724 Temperature Calibrator
Process and Calibration Equipments-Hart Scientific Industrial Temperature Products-FLUKE

Hart Scientific Industrial Temperature Products
  • Calibration Software
  • Handheld and field dry-wells
  • Infrared calibrators
  • Microbaths
  • Temperature probes
  • Temperature readouts
  • Thermocouple furnaces
Process and Calibration Equipments-Portable, flexible solutions for stand-alone or PC-based data acquisition-FLUKE

Portable, flexible solutions for stand-alone or PC-based data acquisition
The Hydra Series is available in three models to fit many application requirements. The 2620A Hydra Data Acquisition Unit is a compact front end for use with your PC. The portable 2625A Hydra Data Logger features non-volatile memory that stores more than 2000 scans, for stand-alone applications. And the 2635A Hydra Data Bucket with its removable memory card for data and set-up storage is the most versatile model-ideal for remote monitoring applications.

Process and Calibration Equipments-Temperature-AMETEK

Temperature
  • Dry-block calibrators
  • Reference thermometers
  • Reference sensors
  • FP Temperature Sensors
  • Handheld thermometers
Process and Calibration Equipments-Pressure-AMETEK

Pressure
  • Digital systems
  • Primary standards
  • APM modules
  • Dial-gauge system
  • Pump systems
Process and Calibration Equipments-Signal-AMETEK

Signal
  • JOFRA AMC900 bench top calibrator
  • JOFRA ASM Advanced Signal Multi-scanner
  • JOFRA ASC300 Advance Signal Calibrator
  • JOFRA CSC200-Compact Signal Calibrator
  • JOFRA mAcal-MILLIAMPERE LOOP CALIBRATOR

Flir

FLIR Systems is a leading manufacturer of innovative imaging systems that include infrared cameras, aerial broadcast cameras and machine vision systems. Our products play pivotal roles in a wide range of industrial, commercial and government activities in more than 60 countries. Pioneers in the commercial infrared camera industry, the company has been supplying thermography and night vision equipment to science, industry, law enforcement and the military for over 30 years. From predictive maintenance, condition monitoring, non-destructive testing, R & D, medical science, temperature measurement and thermal testing to law enforcement, surveillance, security and manufacturing process control, FLIR offers the widest selection of infrared cameras for beginners to pros. With over 60 offices and the largest installed infrared camera base in the world, FLIR offers its customers unparalleled service, the best post-sale technical applications support available and world-class infrared camera and thermography applications training.

Products Home
FLIR i50 (Affordable Infrared for Electrical Trouble shooting).

The FLIR i50 thermal imager is jam-packed with many of the features found in higher-model FLIR cameras, including:

  • Advanced 140 x 140 detectors that deliver 19,600 pixels resolution & thermal sensitivity that's higher than the competition.
  • Free Quick Report software with report templates to simplify your work.
  • Easy camera controls, including emissivity & reflective temperature settings to help you troubleshoot with accuracy & confidence.
  • High-powered illuminator helps you see into dark areas and generates quality visible images
  • 2.3 Megapixel visible camera for professional results.
The bright 3.5-inch display makes it easy to see temperature differences and radiation emitted from objects-conditions that signal energy waste, building envelope troubles, even electrical system and component failures!
Link
FLIR T400

The most affordable, feature rich infrared camera available!
The new FLIR T400 is the most affordable feature rich infrared camera available! The T400 now has FLIR FUSION! FLIR's new FUSION functionality allows for easier identification and interpretation of infrared images. This advanced technology enhanced the value of an infrared image by allowing you to overlay it directly over the corresponding visible image. The functionality combines the benefits of both the infrared image adn visual picture at the push of a button. The T400 camera does this in real-time and the overlay function can be easily adjusted to suit any application such as electrical surveys, building diagnostics, and mechanical inspections.
Thermal Fusion Functionality
  • Interchangeable Optics
  • 1.3 MegaPixel Visual Camera
  • Automatically Associates the Visual and Thermal JPEG Images
  • Includes FREE Quick Report Software for Analysis & Reporting
  • Compatible with Optional Microsoft Word -Based ThermaCAM Reporter Software w/Spell Check
  • Removable SD/Memory Card, USB & Video Out
  • In camera Emissivity Tables, 5 Temperature Spots & Delta T Functionality
  • Touch Screen Technology Adds Markers, Draw, Sketches
  • Auto or Manual Focus with 8x Continuous Digital Zoom
  • Auto Hot/Cold Spot & Audible/Visual Alarms
  • Large 3.5"Color LCD Display
  • High Thermal Sensitivity for Maximum Temperature Accuracy
  • Voice, Text & Sketch Annotation
  • Built-in LaserLocatIR
  • Optics head & display screen are independently rotatable for optimum viewing
  • Holster for Portability and Easy Access to Camera
  • Target Illuminator and 1.3 Mega Pixel Visual Camera
  • Tiltable Optics Reduces Back and Arm Strain
  • Touch Screen Text/Sketch Functionality
Link
NEW! FLIR P660

FLIR P660
GPS Enabled High Definition P660 IR Camera

Predictive maintenance is a top priority in industry today. Are you using the latest technology to help maximize worker safety and profitability?
Whether you are an Infrared Consultant or a PDM professional in industry, the new FLIR P660 infrared camera can help you work smarter.
How it Works
The FLIR P660 uses an advanced, highly-sensitive detector for non-contact scanning across wide areas. Camera controls and software make it easy to quickly scan for emissivity and object temperature differences-differences that can signal trouble in electrical systems and infrastructure.
Discover how FLIR's new P660 can make predictive maintenance fast and easy.
Invest in a camera that's built for the future. New technologies in the P660, such as an advanced infrared detector, embedded Geographic Positioning System GPS, remote control, and greater image accuracy help you scan conditions that signal trouble.
Get More IR Camera Features
  • Tag your infrared images with FLIR's (GPS) and Google Earth to save time.
  • Make IR surveys more convenient and safe through WLAN remote control and display.
  • Choose full FLIR Fusion detail to see all the faulty spots inside visible light images.
  • Fine-tune IR images with Dynamic Details Enhancement (DDE).
  • Capture high-quality visible light images with the 3.2 megapixel camera and lamp.
Get Industrial Strength Predictive Maintenance Today
You'll spend less time documenting and explaining where the trouble is. FLIR embedded Geographic Positioning System (GPS) automatically documents satellite coordinates for you so you concentrate more on your work.
Forget standing too close to trouble. Mount the P660 and use the color display and wireless LAN remote to control the camera across terrain, facilities, and harsh environments.
Many times IR images need to be enhanced. DDE is an exclusive feature to the P660 based on technology developed by FLIR for government use.
When you need to add infrared detail anywhere inside a visible light image, use FLIR's full Fusion features and create information-packed images. Advanced FLIR Image Fusion gives you greater flexibility to show trouble spots, so they are not overlooked when they need to be fixed. Choose rectangular Picture In Picture (PIP) or show IR detail of objects in the fused images.
The P660's high-resolution auto focus camera and powerful target illuminator/lamp help you create the best fusion images possible.
Discover how you can avoid costly downtime, ensure a competitive advantage to your business, and advance your career.

Link
Click to see more about applications
Website

GE Sensing GE has united the technological innovation and experience of industry leaders in the design and manufacture of advanced sensing and measurement solutions into one world-class business � GE Sensing. This new multi-million dollar business, with operations around the world, offers a broad range of products and services that help customers solve challenges and drive productivity.
GE Sensing is a global business that provides sensing elements, devices, instruments, and systems that enable our customers to monitor, protect, control, and validate their critical processes and applications. It is a core technology instruments business, focused on high growth industries.
With operations around the world, GE Sensing develops technologies and solutions using thermal validation, dew point measurement, ultrasonic and gas flow measurement, control circuit protection, liquid level detection, process control instrumentation, and microstructure design for products and services in applications such as environmental, marine, meteorology, aerospace, defense, medical, pharmaceutical, biotechnology, automotive, industrial, commercial, petrochemical, power generation, and transportation.
GE Druck, GE General Eastern, GE Kaye, GE NovaSensor, GE Panametrics, GE Pressurements, GE Protimeter, GE SI, GE Thermometrics, GE Ruska, GE Telaire, are now under one name: GE Sensing.

Products Home
Advanced Modular Calibration System



Product Description:
The Advanced Modular Calibration System uses three basic components to provide the multi-functionality to perform duties formerly requiring a wide range of different instruments:
Its basic component is an ultra-compact, electrical, frequency and temperature calibrator, which provides simultaneous measurement and source capabilities.
Pressure measurement is provided by interchangeable pressure modules that can be attached to the calibrator by a pressure module carrier.
If pressure generation is required the calibrator and pressure module can be attached to one of three pressure generation stations, to form a fully-integrated pressure calibrator, of unparalleled performance.
System Features:

 

  • Modular concept provides greater flexibility
  • Re-range during use
  • Expand over time
  • Adapt by application
  • Allows significant inventory reductions
  • Simplifies user training
  • Reduces cost of ownership
Multifunction calibrator
  • Accuracy from 0.0025%rdg + 0.002%FS
  • Measure, source and simulate mA, mV, V, ohms, frequency, RTDs and thermocouples
  • HART communication
  • Easy-to-use, with video quality touch screen
  • Hand held PC version with Windows CE
  • USB and WiFi IEEE 802.11g connectivity
Pressure measurement
  • 25 mbar to 1000 bar/10 inH2O to 15000 psi
  • Accuracy from 0.005%FS
  • Fully interchangeable modules with no need for set-up, calibration or tools
Pressure generation
  • Advanced pressure generation
  • - 95% vacuum to 20 bar pneumatic
  • - 95% vacuum to 100 bar pneumatic
  • - 0 to 1000 bar hydraulic
  • Stand-alone pressure stations can replace hand pumps and can be used as comparators
Applications
  • Instrumentation installation, commissioning, maintenance and calibration
  • System measurement and monitoring
  • Indicator, recorder and controller testing
  • Process loop set up and diagnostics
  • Switch, trip and safety system testing
Suitable for
  • Plant and process engineers
  • Service companies and site contractors
  • Installation and commissioning engineers
  • Laboratory technicians
Link

PACE5000 Pneumatic Pressure Controller/indicator

PACE5000 pneumatic pressure controller/indicator

Product Description:
Based on the field-proven and highly reliable Druck control technology, the new PACE5000 offers significant improvements in overall precision, long-term measurement stability and control performance over previous generation instrumentation. As such, it is ideal for integration into automated processes where fast and accurate pressure control is required.
A touch screen and a high resolution, 1/4 VGA wide display ensure that the PACE5000 is extremely easy to operate and read. It features a simple icon menu to allow ease of use and comprehensive functionality and connectivity, via RS232 or IEEE. A USB communications port provides for easy PC connection, the use of set-up software and diagnostics download for technical support. Modularity means that 100% uptime is virtually guaranteed with replacement modules of the same pressure range or different pressure ranges easily interchangeable. Only the control module itself needs to be sent for recalibration.
The PACE5000 has been designed to communicate with the GE Druck Intecal software, which was specifically developed to provide support for both laboratory and field calibrations. This provides easy control in a fully integrated pressure calibration loop, giving 100% automated calibrations of pressure transducers and transmitters. Intecal software has full documenting facilities to prepare reports and provide calibration certificates from its database, utilizing readout data from connected calibration equipment and test devices.
Link

ADTS 405F for verification of aircraft pitot-statics

GE Infrastructure Sensing is the foremost supplier of air data test systems, with over 25 years experience in the design and manufacture of advanced pressure measuring instruments and sensors. The ADTS 405 is the latest in a series of reliable, high accuracy, air data test systems.
Flightline - ADTS 405F
Product Description:

The rugged, compact design has evolved as a result of GE Infrastructure Sensing continuous research and development, customer feedback and experience gained from manufacturing thousands of automatic pressure controllers. This has enabled performance, maintainability, and operational simplicity to be optimized.

Features & Benefits:
  • RVSM compatible
  • Flightline and rack mount versions
  • Civil and military specifications
  • Integral pressure/vacuum supplies
  • Single operator, ground or cockpit
  • Protection for aircraft instruments
  • IEEE 488 interface
  • Over 2000 fielded to date.
Link
Loop Calibrator - UPS III

Loop Calibrator - UPS III

Product Description:

It is an essential tool for loop testing, instrument maintenance and valve set-up, with an easy to read display and simple to use time saving features.

Features & Benefits:

  • Measure or Source 0 to 24 mA
  • Accuracy 0.01% of reading
  • Dual mA and % readout, linear or flow
  • Step, Span Check, Valve Check, Ramp
  • 60 Vd.c. measurement and continuity
  • HART compatible
Link

Precision Portable Pressure Calibrator - DPI 610/615

Precision Portable Pressure Calibrator - DPI 610/615
Product Description:

These self-contained, battery powered packages contain a pressure generator, fine pressure control, device energizing (not IS version) and output measurement capabilities, as well as facilities for 4 to 20 mA loop testing and data storage. The rugged weatherproof design is styled such that the pressure pump can be operated and test leads connected without compromising the visibility of the large dual parameter display. The mA step and ramp outputs and a built-in continuity tester extend the capabilities to include the commissioning and maintenance of control loops.

Features & Benefits:

  • 52 Ranges from 2.5 mbar to 700 bar
  • Accuracy from 0.025% F.S.
  • Integral combined pressure/vacuum pump
  • 4 to 20 mA loop test facility
  • RS 232 interface and fully documenting version
  • Up to 11 sensors per instrument
Link

DPI 104 Digital Test Gauge
Druck DPI 104 Digital Test Gauge
Product Description:

The DPI 104 is a micro-processor controlled, network capable digital pressure gauge that combines precision and functionality in a compact, robust and simple to use package. Featuring 0.05% full scale accuracy, min/max, tare and alarm functions, analog output and a pressure switch test function, the DPI 104 can be used as a stand-alone process indicator or as a pressure reference for use with our widely popular hand pumps.

Link

Hydraulic High Pressure Hand Pump - PV212

Hydraulic High Pressure Hand Pump - PV212

Product Description:

The PV 212 can be used as a portable pressure comparator in conjunction with various pressure indicating devices. It offers adjustable overpressure protection, fine control and a unique priming/high pressure selector switch.

Features & Benefits:

  • Hydraulic pressure up to 1000 bar
  • Compatible with many different liquids
  • Large transparent 100cc capacity reservoir
  • Quick priming and pressure generation using scissor action pump
  • Controlled pressure release and adjustment
  • High pressure / priming selector
Link

Hydraulic Deadweight Testers (Oil operated)-Model P3100

Hydraulic Deadweight Testers (Oil operated)-Model P3100

Product Description:
These robust instruments are highly accurate, quick and easy to use. Units feature a built-in priming pump for large volume applications, piston flotation indicators and a high quality screw press for fine pressure control.

Features & Benefits:
  • Pressure ranges to 60,000 psi (4000 bar)
  • 0.015% of reading accuracy standard (0.008% optional)
  • Single or dual piston formats
  • Built-in hand pumps standard
  • Mounted spirit level with adjustable feet
  • Units can be trimmed to local gravity FOC
Link
A-Z Product Listing
Website

Tradinco Tradinco offers a complete range of workbenches suitable for instrument and electrical workshop testing and calibration application.

The Tradinco system provides you with an efficient working environment resulting in considerable timesavings. The modular concept is designed with flexibility and expansion in mind. We offer complete systems: from simple workbenches to complex applications featuring automatic calibrations in compliance with ISO 9000 requirements. A wide variety of test systems have been built in the past.

Tradinco systems are typically used for the testing and calibration of pressure, temperature and electrical process instruments such as transmitters, switches, gauges, signal converters and temperature sensors.

The calibration modules supplied are comprehensive and suitable for applications with conventional and state-of-the-art instrumentation and can be used in conjunction with AutoCal calibration software.

All calibrators can be supplied with calibration certificates traceable to international standards. In addition to the standard calibration modules offered, other test and measurement modules such as manometers, multimeters and oscilloscopes etc., can be incorporated in the system. Please contact Tradinco to discuss your requirements.

The bench-top units are completely assembled and tested by Tradinco. All you need to do is connecting the bench to pressure/vacuum supply, apply mains power and start calibrating.

Tradinco also offers a comprehensive service for commissioning and the training of personnel who will use the system.

Tradinco offers a complete range of workbenches suitable for instrument and electrical workshop testing and calibration application.

The Tradinco system provides you with an efficient working environment resulting in considerable timesavings. The modular concept is designed with flexibility and expansion in mind. We offer complete systems: from simple workbenches to complex applications featuring automatic calibrations in compliance with ISO 9000 requirements. A wide variety of test systems have been built in the past. A small example of the collection is shown in the photographs on this page. The PDF file gives a better overview.

Tradinco systems are typically used for the testing and calibration of pressure, temperature and electrical process instruments such as transmitters, switches, gauges, signal converters and temperature sensors.

The calibration modules supplied are comprehensive and suitable for applications with conventional and state-of-the-art instrumentation and can be used in conjunction with AutoCal calibration software.

All calibrators can be supplied with calibration certificates traceable to international standards. In addition to the standard calibration modules offered, other test and measurement modules such as manometers, multimeters and oscilloscopes etc., can be incorporated in the system. Please contact Tradinco to discuss your requirements.

The bench-top units are completely assembled and tested by Tradinco. All you need to do is connecting the bench to pressure/vacuum supply, apply mains power and start calibrating. Tradinco also offers a comprehensive service for commissioning and the training of personnel who will use the system.

Website



Contact Email:

 
Navigate